GS-DTMF006
GS-DTMF006 & GS-DTMF007 BATTERY POWERED DTMF CUE LIGHTS
This cue light system operates on the same DTMF frequencies as our GS-DTMF001 to 005 units. The 2 systems can therefore be mixed and matched if required.
Block diagram of GS-DTMF006 & GS-DTMF007
GS-DTMF006
The GS-DTMF006
is powered by battery (1 x PP3) or an external plug top psu. It is a desktop box
with sloping front panel for ease of use.
It generates a DTMF tone and sends it to a single audio output (on male XLR).
The DTMF tone generated can be internally set to be any of the 3 same DTMF tones
used by our GS-DTMF001 to 005 system.
The DTMF tone is generated and sent to the output when an illuminated front
panel push switch is operated.
GS-DTMF006
GS-DTMF007
This is battery powered (1 x PP3) and also has an external DC input. It is a
small robust box (165 x 108 x 50mm w x d x h) and features a 3/8” BSW threaded
hole in its base allowing it to be fixed to mic stands.
It features 3 large very high brightness LEDs all of which illuminate when the
unit receives a suitable DTMF signal.
The DTMF signal that the unit responds to can be internally set from 1 of 3.
GS-DTMF007 FRONT
GS-DTMF007 & GS-DTMF006 REAR