GS-FW001 4 x 4 wire circuits down single CAT5 cable
The GS-FW001 is a 2 part system consisting of a base station GS-FW001-BS and a control panel GS-FW001-CP. The control panel and base station are joined together via a single CAT5 cable. 4 wire & IFB connections are provided on the base station and the user interface is on the control panel. 2 variations of base station are available, one is 'desktop' and has audio connections on 6.35mm jack sockets the other is 1RU 19inch rack mountable with audio connections on 3 pin XLRs.
GS-FW001-BS and -CP
BASE STATION FEATURES:
Mains
powered 230 VAC
Four 4
wire circuits
Four
IFB inputs
IFB inputs are always sent to outputs unless associated speak key on control
panel is operated
Electronically balanced inputs & outputs
Single CAT5 cable connection to the control panel
CAT5 connection carries bi-directional audio for all 4 circuits plus power
Available as either 19 inch 1RU with XLR audio connections or as 'desktop' with
6.35mm balanced jack audio connections
CONTROL PANEL FEATURES:
Single CAT5 cable connection to base station
Powered from base station
Front panel mic or external mic input
Separate gains controls for each mic input
Ccompressor/ limiter circuit on mic input
Latching/ momentary lever keys for speak to outputs
Signal present LEDs indicate when incoming audio is received on each channel
Each 4 wire input has it's own volume control
Mono front panel loudspeaker
Stereo headphone output
Headphone output is on 3 jack sockets one wired traditionally as stereo, one as
both sides to left output & one as both sides to the right output
4 wire inputs can be routed to left/ right or both sides of headphone circuit
Separate left/ right headphone volume controls
LS dim circuit (variable)
CUT LS lever key
Lazy mic output on rear of control panel
Block diagram of
GS-FW001 as adobe .pdf
Views of GS-FW001-CP as adobe .pdf
Views of GS-FW001-BS as adobe .pdf